2008年3月9日星期日

The installation that ADSL dials

The installation

When long-range receive into special subject final

Disposition

Config t enters router

Vpdn enable starts using

No vpdn logging because of the PPPoE application of ADSL pass fictitious

Vpdn - group pppoe starts the process

Request-dialin
Protocol pppoe

It is PPPoE to

Interface FastEthernet0
Ip address192.168.0.1 255.255.255.0

Install company's

Ip nat inside starts using NAT conversion, it is internal network to install Fa0 port, from inside network receives the source address conversion of data to net for the interests of the people address

Interface ATM0 installs ADSL

No ip address since is to get IP address

No atm ilmi-keepalive
Bundle-enable
Dsl operating-mode auto
Hold-queue224in

Interface ATM0.1point-to-point

Rely on VC because of the communication

Pvc 8 / 35 installs the related parameter of PVC

Pppoe - client dial - pool - number 1 PPPoE dials process and has

Interface Dialer1 establishes one,

Ip address negotiated offers development address because of department

Modification mtu of ip mtu 1492 worths in order to apply to ADSL network, acquiescing in for 1500, we will modify , is 1492, this point will be noticed especially, do not modify may appear to lose pack phenomenon.

Ip nat outside starts using NAT conversion,

Encapsulation ppp uses the form

Dialer pool1

Ppp authentication pap callin

Installing the verification

Ppp pap sent vip pass vip sends user name and password, ADSL dial user

Ip nat inside source list 1 interface Dialer1 overload has installed the development address

Ip classless has no kind

The 0 of ip route, 0 0s, 0 dialer1s add one to be short of province

No ip http server
Access-list1permit10.92.1.0 0.0.0.255

Filter when installing

Summarize: After installation is completed , we may start using

没有评论: